Humax F1-VACI User Manual - Page 11

Turn Off Time (Automatic switch off time) To set a sleep time, you can enter the 4 digits of hours and minutes. After setting, the STB is automatically turned off at the set time. If DISABLE is selected, the STB will not automatically turn off. System Setting This menu is used to configure the Audio/Video output parameters, including setting the type of A/V output on the SCART, RF and RCA connector. The Video output can be set for RGB, Composite video (CVBS) or S-VHS depending on the function of TV when you have connected to the SCART. You can select Stereo or Mono Audio output. If you have a widescreen TV, the aspect ratio setting in screen mode should be adjusted to 16:9 to allow the STB to automatically switch to widescreen format for a widescreen programme. Otherwise, set to 4:3. Info. Box display type setting and Info. Box display time setting The brightness and display duration of the information box is set here. The duration can be set in the region of 0 to 20 seconds. If you enter 5 seconds, information box is displayed for 5 seconds after a channel change. Selecting duration of 0 seconds, prevents the Info. Box from being displayed when changing channel or pressing i key. UHF Tuning This menu is used to configure the UHF TV output setting. The required UHF channel, the PAL sound mode and channel offset adjustment are set here. The UHF tuning on the TV may need to be altered after changing the UHF output channel on the STB. 8