Humax F1-VACI User Manual - Page 15
Antenna Setting, Manual Search
View all Humax F1-VACI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Used to register wanted channels. Searching time is faster than another STB. Note : Check the signal level, quality or Network information when channel searching failed. This submenu includes signal quality as graphic bar shape so that you can check the status of antenna or Network information. Antenna Setting More than one satellite antenna may be connected to the STB. It can store the characteristics of at least 8 different antenna configurations using the this sub menu. Press OK after Antenna Setting and go to Manual Search. Antenna Alternative : Select an antenna alternative from 1 to 8. To separate each satellite from connected dishs. Satellite Name : Select a satellite name of LNB configuration. LNB Frequency : Select a LNB frequency or type on the dish - Universal, 5150, 9750, 10600, 11475, User( Use to enter another alternative ). 22 Khz Tone : To support the universal LNB. -Enable, Disable. 0/12 Volt Switch : It is possible automatically switch between two LNBs. DiSEqC Input Selection : It is possible to connection Matrix up to 4 LNBs. Select DiSEqC 1,2,3 A and 4 according to LNB's B connected configuration of DiSEqC. C Refer to right table. D Manual Search Use to search for channels using the frequency, polarisation, symbol rate and FEC of known transponders. This submenu includes signal level as graphic bar shape so that you can view the status of antenna. Option S/W a a b b Satellite position S/W a b a b 12