Humax F2-1002/7002 User Manual - Page 52

** ** DiSEqC Input You can select DiSEqC switch. 1. Select DiSEqC Input using the button, and press the OK or button. Select the DiSEqC Swtich using the button, and press the OK button. You can select one option among Tone burst A~B, DiSEqC A~D, DiSEqC A~D for 2.0 and Disable. LNB Voltage This receiver doesn't provide this function. 8.2 Automatic Search If you select the satellite to search channel according to the Antenna Setting, you can automatically search the satellite without entering any other information. And You cannot watch any programme without searching channel. 1. Select MENU button. 2. Select Installation using the OK or button. button, and press the 3. Select Automatic Search from Installation menu using the button, and press the OK or button. Satellite You can select which satellite to search the channel. 1. Select Satellite using the or button. button, and press the OK 2. Select one of satellites using the the OK button. button, and press Note: Channel Search is performed only for the satellites that have been set to Enable in Antenna Setting-Satellite Alternative menu. If you wish to search channels for satellites, which is not listed on the Satellite List of Automatic Search, move to Antenna Setting and set the Satellite Alternative item as Enable. GB 51