Humax F2-1002/7002 User Manual - Page 64

** ** 5. Manual Update You can perform Manual Update only if you know which satellite has new software and the Transponder information correctly. 1. Select Manual Update from Software Update screen using the button, and press the OK or button. ** Select the the Satellite which provides update software. Satellite list contains the satellites that have been set to Enable in Installation - Antenna Setting - Satellite Alternative menu. For unlisted satellite, start with Antenna Setting. 2. Enter Transponder Frequency in which updated software is provided. 3. Enter Polarisation value. 4. Select Symbol Rate value. If it is not found in the List, select User Define and enter manually. 5. Select FEC value. Note: How to setting Satellite and Transponder for Manual Update Sites is the same as how to edit User Define Transponder data in Manual Search. Refer to Manual Search. 6. Select Search and Press the OK software. button to search 7. It is displayed whether or not New Software exist. If new software does not exist, press the OK button to return to the Manual Update Menu. 8. Select Yes and press the OK updating. Select No and press the OK previous menu. button to start button to return to the 9. Performs Software Update. Please wait until it is completed. 10.When completing the software update, the product is automatically powered off and on again. GB 63