Humax F2-1010T User Manual - Page 35

** ** ** ** ** 8. Installation ** • Current Time Enter the offset value using the standardized information of the current service area. This will be used as the standardized time for the I-plate, TV Guide, Wakeup and Sleep Time. ** • Time Offset Current Time is based at the stream of the current service. GMT is changed by from 30 minutes to 1 hour. The current time is set automatically whenever GMT Offset changes ** • Wakeup Time You can set the time when the product is automatically powered on. Select the Disabled not to set the Wakeup Time. ** • Wakeup Service No. You can set the service number when the product is automatically powered on.. ** • Sleep Time You can set the time when the product is automatically powered off. Select the Disabled not to set the Sleep Time. 3. A/V Output Setting ** You can set Audio or Video Output. ** 1. Select Audio Output, Screen Mode, Display Format, TV Standard or NTSC Mode using the button. 2. Press the vbutton to set each item. ** • Audio Output Set the audio mode which is output from the TV RCA Cable. Select Stereo or Mono. ** • Screen Mode You can set the aspect ratio of your TV which is connected to your receiver. Select 4:3 or 16:9. ** GB 34 ** ** ** ** ** ** **