Humax F2-1010T User Manual - Page 39

** ** ** ** ** 8. Installation ** • Channel Number Select the number of VHF/UHF channel, in which the transport stream is transmitted by using also the NUMERICAL(0~9) button. If the number is correct, the receiver will search any services easily. ** • Frequency Enter the your desired frequency to search directly. When entering frequency, the appropriate service for the entered frequency is automatically displayed on Service. When you enter the frequency, you use the NUMERICAL(0~9) button. ** • Mode Select one option among Auto, 2K FFT and 8K FFT for service search. If you don't know the value, please select Auto. ** • Guard Interval Select one option among Auto, 1/4,1/8,1/16 and 1/32 for service search. If you don't know the value, please select Auto. ** • Network Search If specified frequency service information and other service information are provided together, the service, which belongs to other frequency service, is also searched. Select Yes to search ** all services in the network. If not, select No. ** 3. Default Search Default Search restores the receiver to the default settings Warning: Please Note that once you perform Default Search, all data such as Aerial Setting information Service List, and User Configured data are deleted. 1. Select OK and press the OK setting to Factory Default. button to restore all 2. Select CANCEL and press the OK default setting. button to cancel 3. When default setting is completed, Automatic Search is automatically displayed, which helps Service Search. ** GB 38 ** ** ** ** ** ** **