Humax F2-1010T User Manual - Page 42

** ** ** ** ** ** ** 1. If new software is found when powering on 1. A message will be displayed to notify that new software is found. 2. Select Yes and press the OK button to upgrade the software. 3. Starts downloading new software. Please wait until the upgraded is completed. 4. When completing the software upgrade, the equipment is automatically powered off and on again. 2. STB Upgrade You can perform STB Upgrade only if you know MUX information of software upgrade correctly. 1. Press the MENU button. 2. Select Installation using the OK button. button and press the 3. Select Status using the button. button and press the OK 4. Select STB Upgrade using the OK button. button and press the ** ** 5. When prompting message is displayed to ask PIN code, enter the PIN code using the ** NUMERICAL(0~9) button. The default PIN code is 0000. 6. Select Channel, Frequency, Mode or Guard Interval and press the OK software. button to search 7. It is displayed whether or not new software exist. If new software does not exist, a message will display and press the OK button to return to the STB Upgrade Menu. 8. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu. Performs Software Upgrade. Please wait until it is completed. When completing the software upgrade, the product is automatically powered off and on again. Note: How to setting parameters in STB Upgrade is the same as how to set parameters in Custom Search . Refer to Custom Search. ** GB 41 ** ** ** ** ** ** **