Humax F2-FINDER User Manual - Page 27
Disabled, Tone Burst A to B and DiSEqC A to D. - user manual
View all Humax F2-FINDER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Main Menu Guide LNB Frequency 1. Select the L.O. Frequency that is set to antenna. 2. Press the button to display the LNB Frequency list box (Item window). 3. Press the buttons to select the LNB frequency (Universal, 5150, 9750, 10600, 10750, 11475MHz, User Defined). 4. If the required LNB Frequency is not available then select User Defined and press the OK button. 5. The Input text window will appear and you can enter the frequency manually using the NUMERIC buttons(0~9). 6. When you select Universal, both 9750 and 10600MHz are supported at the same time. The 22KHz Tone setting is unnecessary. (Disabled) 22KHz Tone When you use a dual LNB or two antennas connected to a 22KHz Tone switch box, make 22KHz Tone switch Enable or Disable to select LNB or antenna. DiSEqC Input According to the option and position of DiSEqC switch, select Disabled, Tone Burst A to B and DiSEqC A to D. After setting the above mentioned value, press the OK button to move to the Manual Search menu. Motorised System The Motorised System is used to set the DiSEqC 1.2 motor by Eutelsat specification. If you wish to use this system, please refer to page GB39. GB26