Humax F2-FINDER User Manual - Page 33

Main Menu Guide 5. Sound Track When you want to change the audio language of current service, press MENU( ) button firstly. Use the buttons to select Sound Track and press the OK button. The soundtrack menu is displayed on the top to left side of the screen. To change the audio language: 1. Move the cursor to the desired language on the Category window using the buttons. 2. Press the button to move to Operation window, and then select one among Both, Left and Right from the Audio output item. 3. EXIT button : When this button is pressed, the Soundtrack OSD will disappear keeping the selected Soundtrack language constant. When the current service is switched, the audio language returns to the audio language that was selected in previous service. lf the returned audio language is invalid, the audio language that you selected from the audio language menu has the priority of playback. Soundtracks broadcast in Dolby Digital are indicated by Dolby Digital symbols either side of the respective language selection in the menu. By selecting such a soundtrack the Dolby Digital audio will be output by the optical S/PDIF on the STB. This can be decoded by an external Dolby Digital television or amplifier, for example. Note : When Dolby Digital is selected and actually broadcast, Dolby Digital will be output prior to MPEG. Dolby Digital will be output only through the optical S/PDIF on the STB. 6. Preference The Preference mode supports the STB internal settings according to the connection of the receiver and external units. This mode includes Language Setting, Time Setting, UHF, A/V Output Setting, Status, Default, Others and STB Upgrade. GB32