Humax F2-FREE User Manual - Page 52

8. Installation ** Search You can complete setting and start searching. 1. Select Search and press the OK button to start Advanced Search. 2. The next procedures are the same as those of Automatic Search. Please refer to Automatic Search. 2. SMATV Search If your receiver uses the antenna for common use, operate SMATV Search. For SMATV Search, Channel Search is performed by the antenna for common use regardless of the setting value in Antenna Setting. Select SMATV Search in Other Search Menu using the button. button, and press the OK or ** Frequency 1. Select Frequency using the OK or button. button, and press the 2. Enter the down converted frequency through common LNB. You can enter the frequency between 950 and 2150 MHz. ** Polarisation 1. Select Polarisation using the the OK or button. button, and press 2. Select one from Disable/Auto/Horizontal/Vertical and press the OK button. Note: Horizontal outputs 18V, and Vertical outputs 13V through LNB line. Select Disable when LNB Power is not necessary. ** Symbol Rate 1. Select Symbol Rate using the the OK or button. button, and press 2. Select the symbol rate of the transponder. If the rate does not exist in the list, select GB 52