Humax FOXSAT-HD User Manual - Page 20
First Installation
View all Humax FOXSAT-HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. First Installation When powering on your product for the first time after purchase, the first installation will operate automatically. Tip: • The default password is 0000. • If you have forgotten your password, please contact your local retailer. 3.1 User Settings User Settings allows you to set the language, screen ratio, display format and resolution. Select the value for Preferred Language, Picture Format and Resolution. Select Next and press the OK button. Note: If the product is connected to the TV using an HDMI cable, Original will not be displayed. 3.2 freesat detection 1. Confirm the antenna cable is connected and press the OK button to find freesat. 2. Please wait until freesat detection is complete. 3. When freesat is detected, press the OK button to go to the next step. When there is no freesat, check your satellite antenna cable connection. Warning: To prevent electric shock, always POWER OFF all devices during setting up the connection. GB19 User's Manual