Humax FOXSAT-HD User Manual - Page 45

9. Setup In this chapter you can configure the installation setting and perform channel search. Menus such as freesat tune, software update and factory reset is included in this section. Note: Press the EXIT button to save the changes and return to the previous menu. Press the MENU button to exit the menu screen. 9.1 Freesat Tune 1. Press the MENU button. 2. Select Setup using the / button and press the OK button. 3. Select Freesat Tune using the / button and press the OK button. 4. Enter your region code. 5. Please note that once you perform Freesat Tune, all freesat channels will be deleted. Select Yes and press the OK button to delete all freesat channels. 6. Select Search and press the OK button to search channels. 7. The channel search will start. 8. To stop the search, press the OK button during channel search. 9. The results will appear. Select Save and press the OK button. Note: If there are no channels available, a message indicating the result will pop up. 9.2 Manual Tune 1. Press the MENU button. 2. Select Setup using the / button and press the OK button. 3. Select Manual Tune using the / button and press the OK button. 4. Select Search and press the OK button. The channel search will start. 5. To stop the search, press the OK button during channel search. 6. The results will appear. Select Save and press the OK button. Transponder Select All or the value in the transponder list and press the OK button. If the required value is not available, select User Define and enter the transponder value directly. GB44 User's Manual