Humax FOXSAT-HDR User Manual - Page 23

3. First Installation When powering on your product for the first time after purchase, the First Time Installation will appear. If nothing appears on your TV set please check the following: • Your TV set is switched ON. • Please check that the cables between the TV and product are connected correctly. • Your TV set is switched to the correct channel/input for the connection method/cable you are using. Tip: • The default password is 0000. • If you have forgotten your password, please contact Humax Customer Support. 3.1 User Settings User Settings allows you to set the language, screen ratio, display format and resolution. Select the value for Preferred Language, Screen Ratio, Display Format and Resolution. Select Next and press the OK button. Note: Not all resolutions may work (or be available) with the type of connection (or TV Set) your are using. If you experience problems please select a different resolution. 3.2 freesat detection 1. Confirm the satellite cable(s) are connected and press the OK button. 2. Please wait until the freesat detection is complete. 3. When the freesat signal is detected, press the OK button to go to the next step. Note: • If the freesat detection fails please check that the satellite cable(s) are connected correctly. • For further help see the 14. Trouble Shooting section of the manual. Warning: To prevent electric shock, always POWER OFF all devices during setting up the connection. GB22 User's Manual