Humax HD-5600S User Manual - Page 61

Installation Using DiSEqC Switch Select DiSEqC if you want to search the channels of more than one satellite using the fixed antenna. 1. Check that your antenna connection and the selected antenna type are correct. 2. Select Switch Type and select DiSEqC. 3. Select a satellite figure and press the OK button. Satellite: Select the satellite. LNB Frequency: Select the LNB frequency. 22kHz Tone: Select On when using a 22kHZ tone switch box. DiSEqC: Select the DiSEqC switch. Test Transponder: Check the signal status of each transponder and select the one with the best quality. 4. Select OK. 5. Select Transponder under the activated satellite figure and press the OK button. 6. Select a value in the transponder list. 7. Repeat the four steps above to set more satellites. 8. Select Search and press the OK button. The found channels will be listed. 9. When the search has completed, select Save and press the OK button to save the found channels. Note: • Select User Define to enter options directly. • Refer to Setting Transponder for details in transponder setting. • Select Stop and press the OK button to stop the channel search. Menu On/Off 60 Select Confirm Enter 0~9