Humax HD-5600S User Manual - Page 62

Installation Setting Transponder The available transponders for each satellite are automatically listed. You can enter the transponder setting options directly if necessary. 1. Select Transponder under the activated satellite figure and press the OK button. You can also select Test Transponder in Satellite Setting box. 2. Select User Define to enter options directly. Frequency: Enter the frequency of the transponder. Polarisation: Select the polarisation of the transponder. Symbol Rate: Enter the symbol rate of the transponder. Transmission: Select DVB-S2 for HD broadcasts. Modulation: Select QPSK or 8PSK when selecting DVB-S2 in Transmission. FEC: Select the FEC of the transponder. 3. Select OK. Note: Refer to the following websites for information on up-to-date transponder frequencies. www.lyngsat.com Setting Search Options You can set the options for more specific search. 1. Press the OPT+ button. 2. Set the search options. Network Search: Select On to receive the latest channel information. Scrambled Type: All - FTA - CAS Channel Type: All - TV - Radio 3. Select OK to save and exit. English Menu On/Off Select Confirm Enter 0~9 61