Humax HD-5600S User Manual - Page 66

Installation English Position Setting Set your antenna position for the selected satellites. 1. Select Position Setting. 2. Select Satellite and select the satellite. 3. Select Transponder and select the transponder. 4. Select Motor Driving and select the motor driving option. Continuous - Step - Time 5. When motor driving a set to Step or Time, select Driving Size and select one from 1~127. 6. Select Go to Stored Position to make the antenna turn toward the position of the selected satellite. 7. Fine-tune the position using the / button until the signal strength and quality reaches the maximum level. 8. Select Store Current Position to save the adjusted position. 9. Select Recalculate to recalculate the positions of all satellites based on the position of current satellite. Note: When Motor Type is set as USALS, Motor Driving, Store Current Position and Recalculate are inactivated. Limit Setting Set the operation limit of your motor. 1. Select Limit Setting. 2. Select Limit Position and select East or West. 3. Select Set Limit and set the operation limit to East or West using the / button. 4. Select Reset Position to initialise the position of the motor antenna to the original position (factory default). Menu On/Off Select Confirm Enter 0~9 65