Humax HD-5600S User Manual - Page 84
Error Message
View all Humax HD-5600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Appendix English Error Message Error message No or bad signal [Satellite] No or bad signal [Cable] No or bad signal [Terrestrial] The channel is scrambled or not available. The audio is not available. No access No card inserted. Possible causes The satellite dish is not pointing at the satellite. Signal is too weak. Satellite dish is too small. Problem with LNB. Wrong antenna setting. The cable is not connected. The cable may be damaged or defective. The channel is not broadcasting. The aerial is not pointing properly. The channel has a signal, but no audio or video. The channel has been deleted by the broadcasting company. The channel is for data broadcasting. The channel has a video signal, but no audio. No access No authorization. Smartcard is not inserted. What to do Adjust dish alignment. Increase the LNB voltage or connect a signal amplifier. Change to a larger dish. Change the LNB. Set the antenna correctly. Make sure the cable is connected correctly. Exchange the cable. Exchange the cable. Adjust aerial. Check the cable from the aerial. If you cannot resolve the problem, you may need to have your aerial and installation tested by a professional. Confirm if the channel is currently on air. Check if the channel is currently on air Remove the channel from the channel list and check for new transponder details. Press the audio button to confirm that the channel has audio options. Make sure you are subscribed to the channel. If the product has been turned off for a long time (standby or power off ), please wait for authorization. It may take up to 60 minutes. Insert Smartcard. 83