Humax HD-FOX User Manual - Page 24

3. Installation Wizard 3.5 Antenna Setting Antenna Setting allows you to configure the antenna setting parameters. 1. Satellite: Select the satellite and press the OK button. 2. LNB Frequency: Select the required LNB frequency and press the OK button. 3. 22kHz Tone: Select Enable or Disable and press the OK button. 4. DiSEqC Input: Select the required DiSEqC input and press the OK button. 5. LNB Power: Select the required LNB power. When selecting High, a warning message will appear; select OK and press the OK button. 6. Select Next and press the OK button to proceed. 7. Select Add and press the OK button to add another satellite. You can add up to four satellites. 8. Select Search and press the OK button. Note: • If you cannot find the required LNB frequency from the list, select User Define and manually enter the frequency using the NUMERIC(0-9) buttons and press the OK button. • When using Universal LNB, select Universal. The 22kHz tone value will be disabled. 3.6 Search Channels Channel search will activate and the results will appear. To stop the channel search, select Stop and press the OK button. Select Save and press the OK button to go to the next step. GB23 User's Manual