Humax HD-FOX User Manual - Page 58

9. Installation 2. Satellite Setting 1. Select Satellite Setting and press the OK button. 2. Enter the value for Satellite, LNB Frequency, 22kHz Tone, DiSEqC Input, LNB Power and Transponder. 3. Select Save and press the OK button to complete. Satellite Select the satellite the antenna is pointing to and press the OK button. If the required satellite is not available, select User Define and enter the name of the satellite directly. LNB Frequency Select the LNB frequency value and press the OK button. If the required value is not available, select User Define and enter the LNB frequency directly. Note: If you select Universal, the 22kHz Tone will be set to Auto. 22kHz Tone Select Disable or Enable using the OK or / button. Enable Disable Dual LNB is used or two antennas are connected to the 22kHz tone switch box. 22kHz tone is not in use. DiSEqC Input Select the DiSEqC input option and press the OK button. LNB Power Select Standard or High and press the OK button. Transponder Set the transponder to check the signal status. Select the value for the transponder. If the required value is not available, select User Define and enter the transponder value directly. Select Search and press the OK button to go to search channels. GB57 User's Manual