Humax HD-FOX User Manual - Page 65

9. Installation Activate Satellite Select Disable or Enable using the OK or / button. Enable Disable Channel search is available. Current channel does not exist. Channel search unavailable. Note: Activate Satellite is activated only when User define is selected in Satellite menu. Satellite Longitude Enter the longitude using the NUMERIC(0-9) buttons. Select East or West and press the OK button. 3. Position Setting 1. Select Position Setting using the / button. 2. Enter the value for Satellite, Transponder, Motor Driving, and Driving Size. Satellite Select the satellite the antenna is pointing to and press the OK button. If the required satellite is not available, select User Define and enter the name of the satellite directly. Transponder Select the value for the transponder. If the required value is not available, select User Define and enter the transponder value directly. Motor Driving 1. Select among Continuous, Step or Time and press the OK button. 2. When motor driving a set to Step or Time, the Driving Size option is enabled. Select the driving size using the OK or / button. Go to Stored Position 1. Press the OK button to move the antenna to the position of the selected satellite. 2. Wait until the antenna moves to the position of the satellite. 3. Confirm signal strength and quality level and fine-tune the antenna direction. Move the antenna East/ West by pressing the / button. Adjust the signal level to maximum. GB64 User's Manual