Humax HD-FOX User Manual - Page 66

9. Installation Store Current Position 1. Press the OK button to save the adjusted position of the satellite. 2. The position of the antenna headed for the certain satellite will be saved. Note: You can set the antenna position by repeating the procedure above. Recalculate 1. Press the OK button to recalculate the position of the satellites based on one satellite. 2. To readjust all positions, select Yes and press the OK button. Note: When Motor Type is set as USALS, Motor Driving, Store Current Position and Recalculate are disabled. 4. Limit Setting You can set the default setting and operation limit for the motor antenna. 1. Select Limit Setting and press the OK button. 2. Enter the value for Motor Limit and Limit Position. Motor Limit You can set the maximum motor limit for both East and West to prevent damage to the antenna. Select Off or On using the OK or / button. Off Motor limit setting is released. On Motor limit is set. Motor does not exceed the limit. Note: Select Off when setting a new motor limit. Limit Position Select East or West using the OK or / button. East West Sets East limit. Sets West limit. GB65 User's Manual