Humax HD-FOX User Manual - Page 67

9. Installation Set Limit 1. Press the OK button. 2. Move the antenna to the East or West using the / button. Note: When the limit is set, Motor Limit is automatically enabled. Reset Position 1. Press the OK button to restore the position saved at the motor antenna to factory default. 2. A popup will appear. Select OK and press the OK button to reset all values saved at motor antenna to factory default. Note: Reset may not activate depending on the condition of the antenna. Repeat the procedure above if necessary. 5. Search Channels Satellite Select All or the name of the satellite in antenna setting. Transponder Select All or the value in the transponder list and press the OK button. If the required value is not available, select User Define and enter the transponder value directly. Network Search Select Disable or Enable using the OK or / button. Search Type Select among All, FTA and CAS and press the OK button. Channel Type Select among All, TV and Radio and press the OK button. Select Search and press the OK button. The channel search will start. To stop the search, press the OK button during channel search. The results will appear. Select Save and press the OK button. Note: If there are no channels available, a message indicating the result will pop up. GB66 User's Manual