Humax HD-FOX User Manual - Page 71

9. Installation Polarisation Select one option among Auto, Horizontal and Vertical and press the OK button. Symbol Rate Select one option among 27500, 26000 and 22000 and press the OK button. If the required value does not exist, select User Define and enter the symbol rate directly. FEC Select one option among Auto, 1/2, 2/3, 3/4, 5/6 and 7/8 and press the OK button. 9.6 Default Setting Default Setting enables you to restore the product to the factory default. MENU Installation Default Setting Warning: Please note that once you perform Default Setting, all data such as antenna setting information, channel list, and all user configured data will be deleted. However, the files in the hard disk drive will not be deleted. Note: The files in the hard disk drive will not be deleted. 1. Press the MENU button. 2. Select Installation using the / button, and press the OK button. 3. Select Default Setting using the / button and press the OK button. 4. Select Yes and press the OK button to restore all setting to factory default. To return to the previous menu, select No and press the OK. 5. You will be prompted to enter your password again before starting to load default setting. Enter the password to proceed. 6. When default setting is completed, installation wizard pops up automatically and assists channel search. Tip: The default password is 0000. Note: For detailed information about the installation wizard, refer to Chapter 3. Installation Wizard. GB70 User's Manual