Humax IR-ACE User Manual - Page 42

3-3. Service Searching Antenna Setting The Antenna Setting menu sets the characteristics of each antenna. 32 antennae can be supported, one of which for SMATV. The Antenna Setting menu supplies the following items to characterise the antenna. Antenna Alternative Assigns an index to each antenna. Hence, the value is unique for each antenna. It can assign up to 32 indexes. Satellite Name Assigns a satellite name to each antenna. The available satellite names supplied by default can be used. Moreover, the satellite name can be defined by the user with the "User Defined" item. LNB Frequency Assigns LNB frequency of LNB in each antenna. It can be set as "Universal", "5150", "9750", "10600", "10750" and "11475". It can also be set as any value using the numeric buttons. 22KHz Tone Disables/enables the 22KHz tone in the signal line. DiSEqC Input It sets the DiSEqC input to select a proper antenna. It can be set as "Tone Burst A", "Tone Burst B", "DiSEqC A", "DiSEqC B", "DiSEqC C" and "DiSEqC D". Motorised System Disables/enables the motorise function. LNB Power Switches/off the LNB power. LNB Voltage Sets the LNB voltage level. The LNB voltage may drop too low to supply power to the LNB due to the long length of the signal cable. To compensate the voltage drop, the item should be set on "High". GB41