Humax IR-ACE User Manual - Page 58

A/V & Data In/Out, Physical Specifications, Power Supply

Page 58 highlights

A/V & Data In/Out VIDEO AUDIO R/L RS-232C RCA / Cinch Video Output (CVBS) RCA/Cinch Volume and Mute Control (Resolution : 20 bits DAC, Max. 2 Vrms) Transfer rate 115,200 bps, 9pin D-sub Type Power Supply Input Voltage Type Power Consumption Standby Power Protection 90 - 250V AC, 50/60 Hz SMPS Max. 30 W ≤ 9W Separate internal fuse. The input should be protected against lightning Physical Specifications Size (W x H x D) Weight (Net) Operating Temp Storage Temp Storage Humidity 260 x 50 x 182 mm (IR-ACE) 310 x 60 x 225 mm (IR-ACE M) Around 3.0 kg 0°C to + 45°C -10°C to + 70°C 5% ~ 95% RH (Non-Condensing) • You can use a special antenna switch with DiSEqC commands. When changing ASTRA1 to EUTELSAT, for example, a DiSEqC command is sent with the 22KHz tone via the antenna cable. The antenna switch will change ASTRA1 to EUTELSAT. The DiSEqC concept is a protective trademark of EUTELSAT. • Data rate decides the picture quality of digital TV programmes. The data rate of about 5-6 Mbit/s coincides with the picture quality of an analogue TV programme. GB57

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.