Humax IR-PLUS User Manual - Page 20

** 4. Satellite Setting This menu appears only when you enable Motorised System in Antenna Setting menu and press the OK button while Antenna Alternative in Manual Search menu is selected. ** • Satellite Name: Select a satellite to identify a motor antenna. If the desired satellite name is not listed, then select OTHER. • Movement: In user mode, this is used to fine-tune the position of the motor. In installer mode, this is used to search for the position of the satellite manually. • Motor Control: You can select one option among Search, Goto, Store, or Reset. ** - Search: Searches for services on the selected transponder. - Goto: Moves the motor to the saved position of the selected satellite. - Store: Saves the current position of the motor for the selected satellite. - Reset: Resets all saved positions of the motor relative to the 0 position. (Installer Mode Only) • DiSEqC Command Mode: Select Installer or User mode. ** The following table shows the value of the motor setting options. ** DiSEqC Command Mode Movement Motor Control Installer East / Stop / West Search / Goto / Store / Reset User Stop(60E) ~Stop(0) ~Stop(60W) Search / Goto / Store GB 19