Humax IR1010HD User Manual - Page 29

MENU -> Installation -> Antenna Setting [Fixed] ** You can set the antenna and LNB information for channel search. If the antenna is not properly set, channel search cannot be activated which means you cannot watch any of the programmes on air. 1. Antenna Type Select Fixed Antenna. ** 2. Satellite Setting Enter the value for Satellite, LNB Frequency, 22kHz Tone, DiSEqC Input, LNB Power, Transponder and save. Select Search and press the OK button to go to search channels. ** 3. Transponder Transponder setting is normally fixed. Change the setting only when necessary. To change the transponder setting, select User Define in Transponder and enter the value for Frequency, Polarization, Symbol Rate, Transmission, Modulation and FEC.