Humax IR1100HD User Manual - Page 29

In this chapter you can configure the installation setting and perform channel search. Menus such as antenna setting, search channels, IRDETO software update, Humax sotware update and default setting is included in this section. MENU -> Installation -> Antenna Setting [Fixed] ** You can set the antenna and LNB information for channel search. If the antenna is not properly set, channel search cannot be activated which means you cannot watch any of the programmes on air. 1. Antenna Type Select Fixed Antenna. ** 2. Satellite Setting Enter the value for Satellite, LNB Frequency, 22kHz Tone, DiSEqC Input, LNB Power, Transponder and save. Select Search and press the OK button to go to search channels. ** 3. Transponder Transponder setting is normally fixed. Change the setting only when necessary. To change the transponder setting, select User Define in Transponder and enter the value for Frequency, Polarization, Symbol Rate, Transmission, Modulation and FEC.