Humax IRCI-5400 User Manual - Page 31

Press the button anywhere to start Automatic Search. The picture during searching is as follows. The picture searches with varying Frequency, Symbol Rate and FEC etc. Satellite Name is the name that the user selects to correspond with Antenna Alternative of Antenna Setting. The progress bar(%) appears on bottom of the picture. During the search, services that are found are displayed as follows: 1. Press the button during Automatic Search to stop search. 2. After the search is finished, the appearite message appears. 3. Press the button to return Service Search menu. 4-4. Status STB Status Displays the information of H/W Version, S/W Version, Loader Version and CI CAM of STB and so on. Signal Detection Shows the Signal Level(AGC level) and Signal Quality(BER) of the current service and is help to the initial antenna setting. STB Upgrade You can download and upgrade the software of this STB via ASTRA1 satellite when the software of new version is released. Do not turn off the STB during downloading. When the power is switched OFF, turn on the STB and the process will be continued. 4-5. Common Interface You can enjoy not only scrambled services using the Conditional Access Modules(CAM), but also Free-To-Air services. This STB currently supports six kinds of CAM(VIACCESS™, Nagravision, CONAX, CryptoWorks(TM), Irdeto or Mediaguard). Common Interface module and Smart Card depend on the service provider. If you need CAM, contact your service provider or distributor. Note : If CAM is not used, then only Free-To-Air services are available. 30