Humax IRCI-5400Z User Manual - Page 31

Guide of Main Menu E28 Automatic Search When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency. Antenna Alternative Select the target antenna for Automatic Service Search. The attribute of this antenna alternative number is already set in Antenna Setting menu and the Satellite Name is helpful in the selection of the antenna, but in this menu you cannot change the Satellite Name. Search Type • You can select one of two modes(Quick or Detail). • When you select Quick mode, it searches the service by search parameters that is preset. • When you select Detail mode, it searches the service through all field of tuner(950 - 2150MHz). Detail Mode The pre-fixed symbol rate list is changed according to Antenna Alternative and Satellite Name. If you want to add or change it, press the Red( )button. ** The value of Pre-fixed symbol rates can not be editable. (22000, 27500) The picture of the Symbol Rate Add/Change mode is as follows: 1. When you press the Red( )button after entered to detail mode from search type, yellow box will be trimmed with red edges meaning edit is possible. 2. You can easily put optional value with using Numeric buttons(0~9). 3. Press the Red( )button for confirmation, and you will successfully exit from input mode. If press the button at symbol rate value input mode, the value will be confirmed, and if you moves left or right column use the buttons, you can differ values of symbol rate to input. Then press the and the Red( )button to exit from input mode. To delete a Symbol Rate in the above list, press the 0 (Numeric button) in the selected position and then the symbol rate disappears. The range of Symbol Rate that is input additionally is 16-30Ms/s. Note : The user should select the Satellite name in Antenna Setting menu. When the user types the Satellite Name separately, the search type is fixed to the Detail mode.