Humax PR-HD1100 User Manual - Page 84

** 14.2 Error Message Error message No/bad signal Possible causes The satellite dish is not pointing at the satellite. Signal is too weak. The channel is scrambled or not available. Satellite dish is too small. Problem with LNB. Wrong antenna setting. The channel has a signal, but no audio or video is provided. The channel has not been deleted by broadcasting company. What to do Adjust dish alignment. Increase the LNB voltage or connect a signal amplifier. Change to a larger dish. Change the LNB. Set the antenna correctly. Confirm if the channel is currently on air. Remove the channel from the channel list and check for new transponder details. The channel is for data broadcasting. The channel cannot be viewed with the appropriate model that supports data channels. Audio not available. CI module not installed. Smartcard is not plugged in. Wrong Smartcard is in use. Smartcard is not plugged in properly. Wrong Smartcard is in use. The channel has a video signal, but no audio is provided. CI module is not installed. CI module is not properly inserted. CI module is not recognized. Insert Smartcard. Insert the appropriate Smartcard for the channel(s) you wish to view. Reinsert Smartcard; ensure that it is inserted in the correct way. Contact your Smartcard retailer or channel broadcaster for a Smartcard replacement. Press the audio button on your remote control to confirm that the channel has audio options. Insert CI module. Reinsert CI module. Insert a different CI module to check if your existing module is working correctly. GB 83