Humax PVR-8000 User Manual - Page 33
Channel Search
View all Humax PVR-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Main Menu Guide 4. Channel Search Enter the PIN code to access the Channel Searching menu as you access the Parental Control menu. Press the OK button to start Service Search after setting the parameters. ** The default PIN code is 0000 . Channel Search consists of 5 sub menus. Antenna Configure Antenna Configure enables you to set the installation state of an antenna connected to your STB. You can select using the OK button and toggle between Single and Dual. When Single is selected (this means one signal source is present), an antenna should be connected to Tuner A directly and an input for recording should be connected to tuner B. Two methods are used for connection to Tuner B; one is splitter, another is loop through. When Dual is selected (this mean two signal sources are present), Tuner A performs search. Dual allows two identical signal sources to be input to two different inputs and enables you to view during recording regardless of different polarities. Tuner A performs operations, such as search. Antenna Setting Selects the antenna and LNB settings for Service search. As you can change the settings for 22KHz Tone and DiSEqC switch, there are 32 possible Antenna Setting for use. The values that are set in this menu will be available for selection in other channel searching menus. Antenna Alternative There are 32 antenna alternatives, each one can have different combinations of settings for 22KHz Tone and DiSEqC switch. GB31