Humax PVR-8000T User Manual - Page 59

11. Software Update ** 5. Software Auto-Detecting and Time You can specify the software detecting time. If the receiver powers on during software auto-detecting, Detecting will stop. 1. Select Software Auto-Detecting using the button, and press the OK or button. 2. Select Enable or Disable and press the OK software detecting time automatically. or button whether or not setting the 3. When you select Enable, you can set the detecting time in the Auto-Detecting Time. 11.2 S/W Update from PC You can connect your receiver to the PC directly and update your software by transferring the new software from the PC. Follow these steps to download new software from PC to this product. 1. Download new software file (HDF files) equivalent for this product model from our website into your computer (http://www.humaxdigital.com). 2. Download and install download tool file from our website into your computer. 3. Connect your PC to this product with RS-232C serial cable. 4. Execute installed download tool, and then follow the instructions contained the download tool. 5. Press the STANDBY button to make this product operating. ** GB 58