Humax PVR-9150T User Manual - Page 43

7. Record 4. Changing the Attribute 1. Select a programme and press the YELLOW button to change the attribute of the recorded programme. 2. A pop-up will appear. Select File and press the OK button. 3. Select Programme in the File using the / button and press the OK or button to display a keyboard on the screen.Enter the programme name on the keyboard. Select OK and press the OK button to complete. 4. Select Protect in the File using the / button and press the OK or button to change Enable/Disable. You have to enter a password to change the status from Enable to Disable. 5. Select Lock in the File using the / button and press the OK or button to change Enable/Disable. You have to enter a password to change the status from Enable to Disable. 6. After editing, you have to select Save and press the OK button to save your changes. Note: • If the protect option of the programme is set to Enable, you cannot delete the programme. • If the lock option of a programme is configured to Enable, you have to enter a password to playback the programme. Tip: The default password is 0000. If you have forgotten your password, please contact your local product distributor. 7.2 Recording Schedule You can set a programme to record automatically in Menu-Record-Recording Schedule. 1. Press the MENU button. 2. Select Record using the / button and press the OK or button. 3. Select Recording Schedule using the / button and press the OK or button to display the reserved recording list on the screen. Note: You can schedule recording easily using the programme guide. Refer to Chapter 6. Programme Guide. GB42 User's Manual