Humax PVR-9300T User Manual - Page 40

5. PVR 5.6 Additional Time Shift Operations You can perform additional time shift operations using the following buttons on the remote control. 1. Direct Jump Press the PLAY button while watching TV. If you press the / button, a moving arrow will appear in the progress bar. Move this arrow to a time point using the / button and then press the OK button to play the programme from the specified time point. You can also move to the specified time point directly by entering the time you want using the NUMERIC(0-9) button while playing back a recorded programme. 2. Instant Replay Press the INSTANT REPLAY button to jump back and play from that location. When the replay has been completed the programme will play from the current point. Refer to 8.5 Miscellaneous Settings. SOURCE OPT+ PIP WIDE PIP CH+ PIP CH- MOVE SWAP 3. Commercial Skipping 30 seconds Press the COMMERCIAL SKIP button jump ahead in a recording. You can use the skip operation only when there is a time gap between the current watching point and the broadcasting point while using the fast forward operation. If the time gap is less than 30 seconds, the programme is played from the current broadcasting point. Refer to 8.5 Miscellaneous Settings. 4. Slow Motion Press the SLOW MOTION button to play the current programme in slow motion. Each time you press the SLOW MOTION button, the speed decreases (x 1/2 , x 1/4, x 1/8). Press the PLAY button to stop playing in slow motion and return to normal speed. 5. Repeat Mode You can select a specific block within a recorded programme and play it back repeatedly. Press the A-B button to set the first repeating position. Select the second position using the / button and press the A-B button. Then the programme plays back the selected block repeatedly. To stop the repeat mode, press the A-B button while repeating the selected block. Press the STOP button to stop playing the saved programme and watch the current programme on air. GB39 User's Manual