Humax PVR-SMART User Manual - Page 15

2. Setup ** This chapter describes how to connect the product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. Note: If you encounter any problem when setting up the product, please contact your local product distributor. 2.1 Connecting Aerial 1. Connecting TV and VCR 1. Connect your aerial to the ANTENNA IN connection on the product. 2. Connect an RF (coaxial) cable from the TV/VCR (Loop out) output to the aerial input of the VCR. 3. Connect an RF (coaxial) cable from the aerial output (RF Out) of the VCR to the aerial input of the TV set. 4. Connect the mains plug of the product to a wall socket. ** GB 14