Humax PVR-SMART User Manual - Page 16

2. Setup ** 2. Connecting TV 1. Connect your aerial to the ANTENNA IN connection on the product. 2. Connect the product and TV using RCA cable. 3. Connect an RF (coaxial) cable from the TV/VCR (Loop out) output to the aerial input of the TV set. 4. Connect a SCART to Component (YPbPr) cable from the TV SCART on the product to a Component connection on the TV set. 5. Connect the mains plug of the product to a wall socket. ** Note: • If you connect to the TV using RF cable, you should set the UHF channel before use. The default channel is 36. Please refer to 9.5 UHF tuning. • When connecting to the TV using a SCART to SCART cable, you should set the TV SCART output to CVBS in MENU-Preferences-A/V Control. • When connecting to the TV using a SCART to Component cable, you should set the TV to YPbPr (576i 50hz). • When another cable instead of the SCART to SCART cable is used to connect to the TV, the screen may not display the proper aspect ratio. In such case, reset the aspect ratio of the TV. ** GB 15