Humax VA-5200C User Manual - Page 22

Guide of Main Menu 4-3. Service Searching Enter the PIN Code to access the Service Searching menu as you access the Parental Control or Service Organising menu. Press the button to start Service Search after setting the parameters. ** The default PIN Code is 0 0 0 0 . Manual Search After setting the search parameters such as Frequency, Symbol Rate etc.., you can manually find the services you have selected. Frequency Input the Frequency of the cable signal you want to find manually. Symbol Rate Input the Symbol Rate of the cable signal you want to find. Constellation Select the Constellation of the cable signal you want to find. You can select the value of 16, 32, 64, 128, 256-QAM or Auto. Network Search You can select Yes or No. When you select "Yes", you can find more services using the home network. As it refer to NIT during searching, if there is information about the frequency of other services, it searches not only the service the user has entered but the other services. Service Search OSD • If you press the button during the search, then Service Search stops and the searching menu will appear. • When you find all the services, the following picture appears. • Before saving it, you can select the services you want to delete. Found services OSD • The picture above shows services that are found after Manual Search. • Use the Red( )button to mark the services that you want to delete. To unmark a service, select the service and press the Red( )button again. 21