Humax VA-5200C User Manual - Page 7

There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: ANTENNA TV/VCR TV only 1. Connect one end of 21-pin SCART cable to the TV SCART socket on the STB and the other end to a SCART socket on your TV. 2. If you want to use RCA/Cinch cable, connect one end of RCA/Cinch cable to the VIDEO socket on the STB and the other end to a Video Input socket on your TV. Connect two ends of RCA/Cinch stereo cable to the AUDIO R/L socket on the STB and the other ends to the Audio R/L Input socket on your TV. 3. Connect one end of RF lead to the TV/VCR socket on the STB and the other end to the RF IN socket on your TV. 4. Connect your CATV line to the ANTENNA socket on the STB for receiving cable services. TV with VCR 1. Connect one end of a 21-pin cable to the TV SCART socket on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a 21-pin SCART cable to the VCR SCART socket on the STB and the other end to a SCART socket on your VCR. 3. Connect one end of a RF lead to the TV/VCR socket on the STB and the other end to the RF IN socket on your TV. 4. Connect your CATV line to the ANTENNA socket on the STB for receiving cable services. With Hi-Fi System 1. Connect an RCA/Cinch stereo cable from the AUDIO L,R sockets on the back of the STB to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi-Fi system. Connect a S/PDIF Fiber-Optic cable If you are watching a programme with a Dolby Digital soundtrack (see page 8) you can enjoy the higher quality sound of the Dolby Digital audio by connecting the STB to an external Dolby Digital television or amplifier. Do this by connecting the optical S/PDIF output of the STB to the optical S/PDIF input of the external Dolby Digital product (television, amplifier,...). 6