Humax VHDR-3000S User Manual - Page 54

Installation English Note: • It may take 5~10 minutes to update software. • Other functions such as scheduling programmes will not activate while software update takes place. • Be sure to update software when the signal strength and quality is high. If the weather is not favorable and the signal strength and quality are not recommendable, perform the software update later. • In case of non-mandatory software, select No to display the message again when you power on. • You can also update the software by connecting a USB device which has the new software file. The file can be downloaded from the HUMAX website. Caution: • Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software update, fatal damage may be caused to the product. • Please be careful not to pull out the signal line (RF cable) during software update. Update may be interrupted and the product may not operate. Factory Default MENU Settings Installation Factory Default 1. Select Factory Default. 2. A popup will appear. Select Yes. 3. You will be prompted to enter the password. Enter the password. Note: • The default password is 0000. If you have forgotten your password, please contact your local distributor. • To format the HDD, mark Format HDD. Warning: Please note that once you perform Default Setting, all data such as antenna setting information, channel list, and all user configured data will be deleted. Menu On/Off Select Confirm Enter 0~9 53