Humax XD-400 User Manual - Page 12

** 1. LNB IN 1, 2 Connects to the satellite antenna cable. Up to two cables can be connected. If you use the motor or SMATV antenna, connect to LNB IN 1. ** 2. LNB OUT Connects another digital satellite receiver. ** 3. TV SCART Connects to the TV using a TV SCART cable. ** 4. VCR SCART Connects to the VCR or DVD using a VCR SCART cable. ** 5. AUDIO L/R Connects to the TV or VCR using an RCA cable. ** 6. VIDEO Connects to the TV or VCR using an RCA cable. ** 7. RF IN Connects to the general aerial antenna or cable. ** 8. RF OUT Connects to the RF IN of the TV using an RF cable. Please refer to 10.2.4 UHF tuning. ** 9. RS-232C Connects to the PC to update software. ** 10.S/PDIF Connects to the audio system using an S/PDIF cable. (digital audio) ** 11.ON/OFF Powers on/off. ** Note: The rear of the product is subject to change without notice.