Humax XD-400 User Manual - Page 62

Select A/V Output Setting using the button and press the OK button. 1. Select TV SCART/ VCR SCART/ Audio Output/ Dolby Digital/ Screen Ratio using the button and press the button to select an option. 2. Select Display Format using the button. button and press the Screen Ratio Display Format 4:3 16:9 Letterbox, Centre, Auto ** 3. Select TV Standard using the button to select an option. Pillar Box, Full, Auto button and press the Note: You can choose the Dolby Digital audio stream whenever possible by selecting ON in Dolby Digital. Select UHF Tuning using the button and press the OK button. 1. Select Channel using the button. button and press the The channel range and frequency change according to PAL Standard are as follows: CH21~CH69 PAL I/G for Europe CH28~CH69 PAL B for Europe/Australia CH13~CH62 PAL D for China CH21~CH69 PAL K for Russia ** ** 2. Select PAL Standard using the button and press the button to select an option. Select a PAL standard according to the range of channels above. 3. Select Offset using the button and press the button to select an option. Adjust fine tuning setting. Note: If the product is connected to the TV using the RF cable, you must tune the TV to an UHF channel.