Humax XD-400 User Manual - Page 67

You can set the antenna and LNB information for channel search. If the antenna is not properly set, channel search cannot be activated which means you cannot watch any of the programmes on air. Select Antenna Setting using the button and press the OK button. Note: The product can detect the antenna connection type (Loop-though or separate type) automatically. MENU>Installation>Channel Search>Antenna Setting (Fixed Antenna) Antenna Alternative Add the satellite you set using the button. Satellite Name Select Satellite Name using the button and press the button to select the satellite the antenna is pointing to. If the required satellite is not available in the list, select User Define. A keyboard will appear. Enter the name of the satellite on the keyboard screen. Press the YELLOW button to complete. LNB Frequency Select LNB Frequency using the button and press the button to select an option. ** If the required value does not exist, select 0 (User Define) and enter the LNB frequency directly using the NUMERIC(0-9) buttons. ** Note: If you select Universal, the 22kHz Tone value is set to Disabled. LNB Power Select LNB Power using the to select an option. button and press the button 22kHz Tone Select 22kHz Tone using the button to select an option. ** button and press the Enable Dual LNB is used or two antennas are connected to the 22kHz tone switch box. Disable 22kHz is not in use. ** Motorised System Select Motorised System using the button and press the button to select Disable. DiSEqC Input Select DiSEqC Input using the button and press the button to select an option.