Humax XD-400 User Manual - Page 68
MENU>Installation>Channel Search>Antenna Setting Motor Antenna
View all Humax XD-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
MENU>Installation>Channel Search>Antenna Setting (Motor Antenna) ** When using a motor antenna, set Motorised System in antenna setting to Enable before performing channel search. Note: When using the motor antenna, connect to LNB IN 1. The procedures of Antenna Alternative, Satellite Name, LNB Frequency, LNB Power and 22kHz Tone are similar to those of the fixed antenna. Please refer to Fixed Antenna. Motorised System Select Motorised System using the button to select Enable. button and press the DiSEqC Input Select Motorised System using the button to select Enable. button and press the ** USALS Motor Antenna using USALS DiSEqC1.2 General motor antenna using DiSEqC 1.2 ** The options you can select from are different depending on the type of DiSEqC Input you choose. When DiSEqC Input is set as USALS, press the GREEN button to set the position. Select My Longitude/My Latitude using the button and set the value using the NUMERIC(0-9) buttons or button. And select OK and press the OK button. Movement When DiSEqC Input is set as DiSEqC1.2, select Movement and set the value using the OK or button. Motor Control Select Motor Control using the button and set the value using the OK or button.