Humax iCordCable User Manual - Page 57

Installation Software Update MENU J Settings J Installation J Software Update In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the HUMAX website to check the latest news and newly released software versions. (http:// www.humaxdigital.com) It is recommended that you periodically check for the availability of software update. OTA, an abbreviation of Over-the-Air, means that the software can be downloaded through your aerial. The manufacturer reserves the right to decide when and where to release software by this process. You can also search and download new software manually. Note: Make sure the LAN cable is connected when you update the software. The software cannot be updated via Wi-Fi connection. Automatic Update 1. Select Automatic Update and press the OK button to search for new software. 2. When new software is detected, select Yes to start the update process now. Manual Update 1. Select Manual Update and press the OK button. 2. Enter the options manually. h Frequeucy: Enter the frequency. The corresponding frequency value will be automatically displayed. h Symbol Rate: Enter the symbol rate. 3. Select Search and press the OK button to search for new software. 4. When new software is detected, select Yes to start the update process now. Please wait until the update is complete. When completing the software update, the product is automatically powered off and on again. Menu On/Off 56 Select Confirm Enter 0~9