Humax iCordHD User Manual - Page 16

2. Setup This chapter describes how to connect your product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. Note: If you encounter any problems setting up your product, please contact your local product distributor. 2.1 Connecting the Antenna You can select one of the following antenna connections depending on the equipment you have. The product has two antenna modes according to setting. 1. Loop Through 1. Connect the antenna cable to LNB 1 IN. 2. Connect the other cable from LNB 1 OUT to LNB 2 IN. Note: • Connect to LNB 1 IN when using the motor antenna, SCD Antenna (also known as Unicable or SATCR) or SMATV antenna. • You can switch channels while recording if the channels share the same polarity. However, you cannot switch to a channel with a different polarity from the channel being recorded. 2. Two Separate Antennas Setting Connect the two antenna cables providing different broadcasting signals to your product. You can configure LNB 1 IN and LNB 2 IN independently. GB15 User's Manual