Humax iHDR-5200C User Manual - Page 35

Recording and Playback Setting Recording Options MENU Settings Preferences Recording You can set the recording padding time in case the recording starts earlier or ends later than scheduled. Start Padding Time : Additional recording time before the recording starts. End Padding Time : Additional recording time after the recording ends. You also can set the instant replay or skip time for the INSTANT REPLAY or SKIP button. Note: • You can record radio programmes also. • The record banner will be displayed with the i-plate whenever pressing the i button. • You can change the recording duration by using the RECORD button for instant recording or by going to MENU > TV Guide > Schedule for scheduled recording. • When a new scheduled recording starts while a recording is already in progress, the record banner will be displayed for a few seconds to inform you that the recording has been started. If you are not watching the channel being recorded, a record notice will pop-up 30 seconds before the scheduled recording starts, and the channel will switch to the scheduled programme automatically at the start time. • Pressing the STANDBY button while recording will not stop the recording. New recordings will start even in standby mode. • While watching a recording programme, you can trick-play using the playback control buttons such as pause, fast rewind, instant replay, slow, etc. • You can record the digital TV or radio programmes only. The external AV inputs can't be recorded. • Ensure that there is enough free space before recording. If the free space on the hard disk drive is insufficient, recording will stop. Recording one hour of programme may require up to 2 or 3GB of hard disk space. The space for recording a 1 hour programme may differ depending on the programme. • To view the recorded programme list, press the MEDIA or MENU button and select Video. (Refer to Using Video List.) Record 34 Select Confirm Enter 0~9