Hunter 21621 Owner's Manual
Hunter 21621 Manual
 |
View all Hunter 21621 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21621 manual content summary:
- Hunter 21621 | Owner's Manual - Page 1
Assistance For reference, also attach your receipt or a copy of your receipt to the manual. _W_e_s_t_si_d_e__II Model Name _2_1_6_2_1 Model No. Date Purchased Where Purchased Type 3 Models Owner's Guide and Installation Manual English Español Form# 42797-01 20081113 ©2008 Hunter Fan Co. - Hunter 21621 | Owner's Manual - Page 2
and Cleaning Your Ceiling Fan 15 12 • Troubleshooting 16 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your - Hunter 21621 | Owner's Manual - Page 3
, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you - Hunter 21621 | Owner's Manual - Page 4
. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and - Hunter 21621 | Owner's Manual - Page 5
isolator into the holes in the ceiling plate. 2-3. Thread the lead wires from the outlet box down through the hole in the middle of the ceiling plate. 2-4. Align the slotted holes in the ceiling plate with the pilot holes you drilled in the wood support structure. For proper alignment use slotted - Hunter 21621 | Owner's Manual - Page 6
three raised tabs on the hanger adapter with the three narrow notches in the top housing. Make certain the housing sits flat on the adapter. 3-2. Install three (3) assembly screws and tighten them securely. Steps 3-1 - 3-2 Assembly Screw Top Housing Hanger Adapter 6 42797-01 • 11/13/08 - Hunter 21621 | Owner's Manual - Page 7
sure the green ground wire is pointing up toward the ceiling. 4-5. Align the holes fan and place the hook on the ceiling plate through the round hole in the rim. WARNING: Fan may fall if not assembled as directed in these installation instructions. Round Hole 7 42797-01 • 11/13/08 • Hunter Fan - Hunter 21621 | Owner's Manual - Page 8
don't match, the transmitter will not function. 5-2. Install the included 12-volt battery into the transmitter. CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this - Hunter 21621 | Owner's Manual - Page 9
wire from the fan to the red wire from the receiver. • Connect the black wire with a white stripe from the fan to the black wire with a white stripe from the receiver. • Connect the white wire from the fan to the white wire (LIGHT OUT) from the receiver. 9 42797-01 • 11/13/08 • Hunter Fan Company - Hunter 21621 | Owner's Manual - Page 10
ceiling plate and the downrod to the ground wire from the ceiling. 6-9. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. Place the green and white wires on a separate side of the outlet box from the other wires. 10 42797-01 • 11/13/08 • Hunter Fan Company - Hunter 21621 | Owner's Manual - Page 11
Steps 7-1- 7-3 7 • Installing the Canopy 7-1. Holding the canopy, raise the fan off the hook. 7-2. Align the holes in the canopy with the mounting holes on the ceiling plate. 7-3. Insert and tighten the mounting screws securely. Canopy Mounting Screw 11 42797-01 • 11/13/08 • Hunter Fan Company - Hunter 21621 | Owner's Manual - Page 12
Holes 8 • Assembling the Blades 8-1. Insert blade into slot. Align the holes on the blade with the holes in the fan motor. 8-2. Slide flat washers onto the shafts of the blade assembly screws. 8-3. Attach the blade to the motor using the blade assembly screws. 8-4. Repeat for - Hunter 21621 | Owner's Manual - Page 13
fan to the 2-pin plug connector from the ballast. 9-6. Attach the ballast to the light kit fitter with two ballast screws. 9-7. Install the three holes in the trim band with the three holes in the fitter. Install and securely tighten all three screws. Steps 9-1 - 9-8 Light Kit Fitter Fluorescent - Hunter 21621 | Owner's Manual - Page 14
mount the remote holder on the wall. 10-7.This product includes one 12-volt type 23A, MN-21 battery for use with the remote control transmitter. Please contact your local battery recycling center for proper battery disposal information. Step 10-6 14 42797-01 • 11/13/08 • Hunter Fan Company Step - Hunter 21621 | Owner's Manual - Page 15
remote control will not be used for 5 days or more, turn the wall switch OFF. 11-3. Ceiling fans the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around -gloss blades in the same manner as the fan finish. In warm weather, use downward air flow - Hunter 21621 | Owner's Manual - Page 16
qualified Hunter ceiling fan! With this purchase, you are doing your part to protect the environment. In 2010, ENERGY STAR qualified ceiling fans are ceiling fans save energy because they have more efficient fan motors and air delivery due to more aerodynamic blade configurations. Ceiling fan models - Hunter 21621 | Owner's Manual - Page 17
when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade and/or blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888‑830‑1326 or
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
Type 3 Models
Type 3 Models
Type 3 Models
Form# 42797-01
20081113
©2008 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual
Westside II
21621