Hunter 21894 Owner's Manual
Hunter 21894 Manual
 |
View all Hunter 21894 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21894 manual content summary:
- Hunter 21894 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 3 Models Owner's Guide and Installation Manual English Español Form# 45003-01 20110712 ©2011 Hunter Fan Co. - Hunter 21894 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 17 10 • Troubleshooting 18 Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of - Hunter 21894 | Owner's Manual - Page 3
and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole - Hunter 21894 | Owner's Manual - Page 4
support service panel. 5-2. read the fan supply line through the outlet box so that the fan supply line extends at least 6" beyond the box. 5-3. Attach the fan ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling - Hunter 21894 | Owner's Manual - Page 5
, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Angle Mounting Style Ceiling Outlet Box 8 12 For - Hunter 21894 | Owner's Manual - Page 6
site) Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888 - Hunter 21894 | Owner's Manual - Page 7
support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" in diameter. Note: Your fan comes with four the wood support structure. For proper alignment use slotted holes directly across from each other. If you are installing the fan on an ANGLED ceiling, be - Hunter 21894 | Owner's Manual - Page 8
the notch pop into place.) Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-1 - 3-3 Adapter Steps 3-4 - 3-5 Downrod Canopy (with Washer) Canopy Trim Ring Set Screw Indent 8 45003-01 • 07/12/2011 • Hunter Fan Company - Hunter 21894 | Owner's Manual - Page 9
connectors upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Wire Connector 9 45003-01 • 07/12/2011 • Hunter Fan Company - Hunter 21894 | Owner's Manual - Page 10
canopy clockwise to secure. 5-4. Install third & fourth canopy screw in round hole on canopy. Securely tighten all four screws. 5-5. Using both hands, push the canopy trim ring up to the top of the canopy. 5-6. Step 5-4 Step 5-3 Step 5-5 Canopy Screw 10 45003-01 • 07/12/2011 • Hunter Fan Company - Hunter 21894 | Owner's Manual - Page 11
shipping blocks. 6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Grommet Note: The blades on this fan have been treated with Hunter - Hunter 21894 | Owner's Manual - Page 12
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch - Hunter 21894 | Owner's Manual - Page 13
to the upper switch housing with three housing assembly screws. Lower Switch Housing Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light - Hunter 21894 | Owner's Manual - Page 14
Place the finial over the threaded portion of the heater vent and twist it as shown to tighten it against the glass bowl. Switch Housing Screws (3) Light Bulbs (B10 Candelabra Base 40 Watt Maximum) Threaded Portion of Heater Vent Glass Bowl Finial 14 45003-01 • 07/12/2011 • Hunter Fan Company - Hunter 21894 | Owner's Manual - Page 15
a stud is not possible. Use the inner mounting holes. Step 8-1 Step 8-2 CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the - Hunter 21894 | Owner's Manual - Page 16
remote if you are using more than one remote controlled fan in the same area and want to control them separately. You may want to label your remotes and 1 (low) buttons (in that order) on the remote. Note: The receiver (built into the fan) has a memory function that retains the last DIP switch - Hunter 21894 | Owner's Manual - Page 17
will not accept any commands from the remote until the heater is turned off. Light Fan Medium Heater Fan Low Fan High Fan Off Steps 9-1 - 9-2 Reversing Switch Normal Operation: The heater must be turned off. Heater Function: make sure the ceiling fan is turned off AUTO RESUME FEATURE This - Hunter 21894 | Owner's Manual - Page 18
are securely attached to the blade irons, follow the instructions in the enclosed balancing kit to balance the fan. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. Problem: Lights shut off suddenly, but fan is still operating 1. Check to make sure
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
Type 3 Models
Type 3 Models
Type 3 Models
Form# 45003-01
20110712
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual