Hunter 22388 Owner's Manual
Hunter 22388 Manual
 |
View all Hunter 22388 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 22388 manual content summary:
- Hunter 22388 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Form# 42408-01 20090810 ©2009 Hunter Fan Co. - Hunter 22388 | Owner's Manual - Page 2
and Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating - Hunter 22388 | Owner's Manual - Page 3
a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase - Hunter 22388 | Owner's Manual - Page 4
, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and - Hunter 22388 | Owner's Manual - Page 5
two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" Ceiling in diameter. Plate 2-2. Your fan comes with two neoprene noise isolators two tabs are pointing toward the ceiling peak. 5 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 6
Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-1 - 3-2 Setscrew Steps 3-3 - 3-4 Ceiling Plate Tabs Step 3-5 Downrod Canopy Low Profile Washer #8-32 x 3/4" Screw Canopy Slots 6 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 7
(ungrounded) from the ceiling to the black (ungrounded) and the black/white wire (ungrounded) from the fan CAUTION: Be sure no bare wire or wire strands are visible after making connections. 4-6. Turn the splices upward the other side of the outlet box. 7 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 8
secure in the groove in the hanger ball. WARNING: Failure to complete this step could cause fan to fall. 5-2. Lift the fan and align the canopy screw holes with the mounting holes on the ceiling plate. 5-3. Partially from the canopy. Step 5-4 Step 5-5 8 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 9
Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both - Hunter 22388 | Owner's Manual - Page 10
• Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below - Hunter 22388 | Owner's Manual - Page 11
housing with three housing assembly screws. Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that Detail Plug Connector Housing Assembly Screw 11 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 12
, Thread the light pull chain throught the hole in the center of the cover plate. 7-12. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-13. Place the cover plate up Breakaway Connector Glass Bowl Cover Plate Finial 12 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 13
with step 7‑6. Steps 7-17 - 7-19 Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-21 13 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 14
, use downward air flow pattern In cold weather, use upward air flow pattern To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 42408-01 • 08/10/09 • Hunter Fan Company - Hunter 22388 | Owner's Manual - Page 15
blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42408-01
20090810
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Owner’s Guide and Installation Manual